Hydraulic Shearing Machine, Sheet Metal Shearing Machine With
Pneumatic Supporter 6-40mm
1.Guillotine shear standard configuration:
1. Hydraulic guillotine structures.
2.Clip-and- sleeve system.
3. Automatic clearance gap adjustment
4. Automatic Cutting angle adjustment by motor,back-gauge
controlled by motor and display in CNC system.
5. Blades material 6CrW2Si
6. Safe pedal
7. Hydraulic system:Rexroth,Germany .
8. Motor: Siemens.
9. Pump: Chinese famous brand.
10. NOK Japan layer seals for main cylinders.
11. Schneider main electrics.
12. With Holland DAC 360
13. Light alignment device
14. Back doors with safety light curtain.
15. Electrical cabinet with ABB switch power outage.
16. Sectional blades
17. Servo Motor and Driver:YASKAWA,Japan.
18. The back-gauge is balls screw and liner guide.
- DAC 360 Go-To Programmable digital control provides up to 750mm
travel on hardened ballscrew back-gauge allowing operator to
program the cut length required. Also fitted is a stroke counter
& stroke adjustment dial allowing shorter materials to be cut
using a shorter stroke length, this feature will increase
2. Hydraulic individual sheet material clamping system with nylon
inserts to protect material from indentation from the clamping
cylinders along full length of machine.
3. Adjustable hydraulic variable blade rake system via control
4. Control box mounted higher than standard on side of machine to
protect it from material damaging the control unit due to heavy
material loading on sheet supports prior shearing.
5. Simplified blade gap adjustments to allow for a wide range of
material types and thicknesses of 0.7 - 8mm enabling minimised
distortion of the cut length.
6. Transfer balls inserted into work table allowing material to be
easily moved to the cut position and squaring arm.
7. Top shearing blade made from 6CrW2Si quality composite and has
two (2) cutting edges allowing minimised down time in blade
- Bottom shearing blade made from 6CrW2Si quality composite and has
four (4) cutting edges allowing minimised down time in blade
9.The core structure of the steel main frame has been
electronically welded ensuring maximum penetration during the
manufacturing process. In addition to this feature the cutting beam
has been stress relieved eliminating any distortion after
10. Shadow line lighting has been incorporated into the machine
frame providing a clear cutting line on the work piece and enabling
scribed or marked material to be cut with simplicity as required.
11. Heavy duty squaring arm is fitted with a graduated rule and
adjustable flip up front stops allowing operator to cut to measure
from the front of machine. Flip over stops can be set to repeat
cutting length required with accuracy. The arm also aligns the
material to be located square to the cutting edge.
12. Safety reset button for guarding system located at rear of
machine, this feature requires operator to walk to rear of machine
to visually check for any obstruction prior to resetting &
13. Mild steel capacity is rated on hot rolled material with 250MPA
1. DELEM DAC 360 go-to programmable hardened ballscrew back-gauge
750mm travel with fine adjustment
2. Adjustable hydraulic variable blade rake system via control
3. Heavy duty over driven machine construction
4. Rapid blade gap adjustment
5. Emergency stops fitted on both ends of machine for additional
6. Individual hydraulic hold downs with nylon pads
7. Shadow line lighting allows operator to quickly see the cut line
8. Swing away back-gauge function for cutting long sheets
9. 4 edge quality 6CrW2Si blades suitable for stainless steel
10. Taiwan hydraulic valves
11. Telemecanique electrical components(Schneider)
12. Transfer balls on table & support arms
13. Heavy duty support arms and squaring arms
14. Stroke counter and short stroke adjustment
15. Sliding chute with ball transfers inserts for cut pieces
16. Three safety photo electric light beams on rear guarding
17. Optional Pneumatic sheet supports MODEL available
|1||Max. cutting thickness|
|2||Max. cutting length||3200mm|
|4||Back gauge distance||750mm|
|8||Overall dim. (L*W*H)||3850*1900*1995mm|